Hifikeidas

HELIX M SIX DSP

•6-kanavainen DSP-vahvistin
• 10-kanavainen DSP
• 6 x 100W / 3 x 200W
• Laajat suotimet
• Todella laajat säätömahdollisuudet

699.00  sis alv25,5%

Pyydä tarjous! Pyyntihinta ei ole välttämättä myyntihinta ;)

Varastossa

Kuvaus

Helix M SIX DSP on huippulaadukas 6-kanavainen kokoäänialueen DSP-Vahvistin. Tämän DSP-Vahvistimen suotimet ja säätömahdollisuudet ovat niin monipuoliset ja laaja-alaiset, että ne mahdollistavat lähes rajattomat asennusmahdollisuudet.

Teho:
6-kanavaisena: 6 x 100W/rms (4 Ω)
6-kanavaisena: 6 x 100W/rms (2 Ω)
5-kanavaisena: 4 x 100W/rms + 1 x 200W/rms (4 Ω)
3-kanavaisena: 3 x 200W/rms (4 Ω)

Lisätiedot

Paino 3.63 kg (kilogramma)
Tekniset tiedot

– @ 4 Ohms6 x 100 Watts – @ 2 Ohms6 x 100 Watts – @ 1 Ohm- – bridged @ 4 Ohms3 x 200 Watts – bridged @ 2 Ohms- Max. output power per channel*Up to 130 Watts RMS @ 4 / 2 Ohms Amplifier technologyClass D Inputs6 x RCA / Cinch 6 x Highlevel speaker input 1 x Optical SPDIF (12 – 96 kHz) 1 x Remote In Input sensitivityRCA / Cinch 1 – 4 Volts Highlevel 5 – 20 Volts Input impedance RCA / Cinch22 kOhms Input impedance highlevel9 – 33 Ohms or 20 kOhms Outputs6 x Speaker output 4 x RCA / Cinch 2 x Remote Out Output voltage RCA / Cinch6 Volts Frequency response20 Hz – 22, 000 Hz DSP resolution64 Bit DSP power295 MHz (1.2 billion MAC operations/second) Sampling rate48 kHz DSP typeAudio signal processor Signal-to-noise ratio digital input105 / 108 dB Speaker / Line Output (A-weighted) Signal-to-noise ration analog input102 / 105 dB Speaker / Line Output (A-weighted) Distortion (THD) 0.03 / 0.005 % Speaker / Line Output Damping factor100 Operating voltage10.5 – 16 Volts (max. 5 sec.down to 6 Volts) Idle current1950 mA Max. remote output current500 mA Fuse2 x 35 A Maxi-fuse (APX) Power ratingDC 12 V ⎓ 80 A max. Additional featuresADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control Input Dimensions (H x W x D)50 x 320 x 154 mm / 2.00 x 12.60 x 6.06”.

- @ 4 Ohms6 x 100 Watts
- @ 2 Ohms6 x 100 Watts
- @ 1 Ohm-
- bridged @ 4 Ohms3 x 200 Watts
- bridged @ 2 Ohms-
Max. output power per channel*Up to 130 Watts RMS @ 4 / 2 Ohms
Amplifier technologyClass D
Inputs6 x RCA / Cinch
6 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote In
Input sensitivityRCA / Cinch 1 - 4 Volts
Highlevel 5 - 20 Volts
Input impedance RCA / Cinch22 kOhms
Input impedance highlevel9 - 33 Ohms or 20 kOhms
Outputs6 x Speaker output
4 x RCA / Cinch
2 x Remote Out
Output voltage RCA / Cinch6 Volts
Frequency response20 Hz - 22,000 Hz
DSP resolution64 Bit
DSP power295 MHz (1.2 billion MAC operations/second)
Sampling rate48 kHz
DSP typeAudio signal processor
Signal-to-noise ratio digital input105 / 108 dB Speaker / Line Output (A-weighted)
Signal-to-noise ration analog input102 / 105 dB Speaker / Line Output (A-weighted)
Distortion (THD) 0.03 / 0.005 % Speaker / Line Output
Damping factor100
Operating voltage10.5 - 16 Volts (max. 5 sec.down to 6 Volts)
Idle current1950 mA
Max. remote output current500 mA
Fuse2 x 35 A Maxi-fuse (APX)
Power ratingDC 12 V ⎓ 80 A max.
Additional featuresADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control Input
Dimensions (H x W x D)50 x 320 x 154 mm /
2.00 x 12.60 x 6.06”.

×
preloader