Hifikeidas

BRAX GRAPHIC GL2

Brax Matrix 50 mm High-End keskiääni loistavalla äänenlaadulla.

620.00  sis alv25,5%

Pyydä tarjous! Pyyntihinta ei ole välttämättä myyntihinta ;)

Vain 3 varastossa

Kuvaus

Erinomaisen äänenlaadun omaava 50 mm / 2″ High-End keskiäänikaiutin Braxilta.

Ominaisuudet:
– Erinomainen äänenlaatu
– Avoin runkorakenne
– Kevyt alumiinikartio takaa avoimen ja selkeän äänen
– Kullatut liittimet
– Vain 26.8 mm asennussyvyys
– Kaiuttimien suojaritilät sisältyvät pakkaukseen
– Parihinta

Lisätiedot

Paino 1.12 kg (kilogramma)
Tekniset tiedot

Power RMS / max. P 80 / 120 Watts (highpass 400 Hz at 24 dB/Oct.) Impedance Z 4 Ω DC resistance Re 3.1 Ω Frequency response 400 Hz – 20.000 Hz Resonance frequency Fs 165 Hz Mechanical Q factor Qms 8.90 Electrical Q factor Qes 0.55 Total Q factor Qts 0.52 Compliance Cms 720 μm/N Equivalent air volume Vas 0.24 L Force factor B*I 2.6 Tm Efficiency 1 W / 1 m SPL 84 dB Cone area Sd 15 cm² Moving mass Mms 1.6 g Cone material Aluminum cone Mechanical resistance Rms 0.13 kg/s Voice coil diameter ø 19 mm / 0, 75" Voice coil winding height 5 mm / 0.2" Max. linear excursion Xmax +/- 1.0 mm Outer diameter ø 60 mm / 2.36" Installation diameter ø 53 mm / 2.1" Installation depth 26.8 mm / 1.1" Recommended enclosure volumes Sealed box with minimum 250 ml net volume Net volumes Recommended DSP / amplifier settings 0.25 liter (System resonance: 200 Hz) Crossover frequency: 600 Hz Min. filter slope: 12 dB/Oct. 0.5 liter (System resonance: 155 Hz) Crossover frequency: 450 Hz Min. filter slope: 12 dB/Oct. 0.75 liter (System resonance: 140 Hz) Crossover frequency: 300 Hz Min. filter slope: 24 dB/Oct.

Power RMS / max. P 80 / 120 Watts
(highpass 400 Hz at 24 dB/Oct.)
Impedance Z 4 Ω
DC resistance Re 3.1 Ω
Frequency response 400 Hz - 20.000 Hz
Resonance frequency Fs 165 Hz
Mechanical Q factor Qms 8.90
Electrical Q factor Qes 0.55
Total Q factor Qts 0.52
Compliance Cms 720 μm/N
Equivalent air volume Vas 0.24 L
Force factor B*I 2.6 Tm
Efficiency 1 W / 1 m SPL 84 dB
Cone area Sd 15 cm²
Moving mass Mms 1.6 g
Cone material Aluminum cone
Mechanical resistance Rms 0.13 kg/s
Voice coil diameter ø 19 mm / 0,75″
Voice coil winding height 5 mm / 0.2″
Max. linear excursion Xmax +/- 1.0 mm
Outer diameter ø 60 mm / 2.36″
Installation diameter ø 53 mm / 2.1″
Installation depth 26.8 mm / 1.1″

Recommended enclosure volumes
Sealed box with minimum 250 ml net volume

Net volumes Recommended DSP / amplifier settings
0.25 liter (System resonance: 200 Hz) Crossover frequency: 600 Hz
Min. filter slope: 12 dB/Oct.
0.5 liter (System resonance: 155 Hz) Crossover frequency: 450 Hz
Min. filter slope: 12 dB/Oct.
0.75 liter (System resonance: 140 Hz) Crossover frequency: 300 Hz
Min. filter slope: 24 dB/Oct.

BRAX GRAPHIC GL2

SKU GRAPHIC GL2 Category
× Hei!
preloader