Kuvaus
GS Audio VULTUR Series 2-Channel Full-Range Amplifier – 2000W RMS x 2 @1 Ohm with LEDsThe new GS Audio VULTUR GS-2.2000VLT Amplifier is a 2-channel amplifier designed for high-power car audio systems, designed to drive loudspeakers or subwoofers in SPL configurations, demo cars, and systems where strong current delivery at low impedance is required. This new series was created to offer a powerful and versatile solution, with built-in adjustments to adapt the amplifier’s behavior to the type of speaker, subwoofer, box and configuration used.WARNING: THIS MODEL IS A PREVIEW-CURRENTLY UNAVAILABLE-EXPECTED ARRIVAL MID-2026 WE WILL OPEN PRESALESAudio Performance & QualityHIGH PERFORMANCE CLASS D: amplifiers with low distortion and stable response even under demanding loads.2 CHANNEL CONFIGURATION: The GS-2.2000VLT enables two separate high-power channels, making it suitable for both stereo configurations and dedicated uses for driving subwoofers.FREQUENCY RESPONSE: With stated response from 20Hz to 20kHz, the GS-2.2000VLT offers extensive audio signal handling while maintaining flexibility in adjustments.ADJUSTABLE SENSITIVITY 0.2 – 6V: allows integration with various audio sources, aftermarket car stereos, DSPs or external processors.INTEGRATED HPF & LPF FILTERS: adjustable high-pass filter from 10Hz to 500Hz and adjustable low-pass filter from 50Hz to 5kHz allow precise calibration according to the installed system.CROSSOVER MODE: HPF / Full / LPF selection to adapt the amplifier to different usage configurations.Remote Control – NEW GENERATION INCLUDED.Multi-function remote control with built-in digital voltmeter, audio level adjustment, RCA output, and remote management to turn on the amplifier. Ideal for monitoring system voltage and adjusting level directly from the cockpit.Powers and SpecificationsPower output 1 Ohm: 2000W x 2chPower output 2 Ohm: 1500W x 2chPower output 4 Ohm: 1200W x 2chTHD: < 0.1%Frequency response: 20Hz - 20kHzSignal to noise ratio: >90dBSensitivity: 0.2 – 6VHPF filter: 10Hz – 500HzLPF filter: 50Hz – 5kHzCrossover modes: HPF / Full / LPFDimensions: 448mm x 233.5mm x 79mmPower cable cross-section: 50mm² copper or 70mm² CCAIntegrated LED illuminationThe integrated RGB LED system on the top panel offers 10 GAMES OF LIGHT, with automatic or music-synchronized effects, adding scenic visual impact without interfering with audio performance.–> DEDICATED BUTTON to change/deactivate games.An element that elevates the aesthetic impact of the system, adding personality and character to the entire installation!Design and installationNew terminal blocks with Allen screws for more secure clampingReinforced RCA outputs with ferrule: the RCAs are attached directly to the panel via ferrule, providing greater mechanical stability and reducing the risk of connector breakage or smashing during use.For maximum performance, it is essential to use a proper electrical system, with properly sized wiring, a high-performance battery, and an alternator suitable for the amplifier’s current demand.Remote control included (with voltmeter display)Data Sheet and User’s ManualDownload Vultur Amplifiers user manual (pdf link)Download the multilingual CE Mark certificatePackage contents: Amplifier, user’s and installation manual, GS Audio vinyl pre-spaced, mounting screws
