Technical data: Power RMS – @ 4 Ohms 1 x 350 Watts – @ 2 Ohms 1 x 600 Watts – @ 1 Ohm 1 x 900 Watts* – bridged @ 4 Ohms – – bridged @ 2 Ohms – Max. output power Up to 1000 Watts RMS @ 1 Ohm Amplifier technology Class D Inputs 1 x RCA / Cinch 2 x Highlevel speaker input 1 x Remote In 1 x Remote control input Input sensitivity RCA / Cinch 0.5 – 3 Volts or 1 – 6 Volts Highlevel 2.5 – 16 Volts or 5 – 32 Volts Input impedance RCA / Cinch 8.6 kOhms Input impedance highlevel 9 – 33 Ohms Outputs 1 x Speaker output Output voltage RCA / Cinch – Signal converter for digital input – Frequency response 10 Hz – 25, 000 Hz Bass boost – Highpass – Lowpass 50 Hz – 250 Hz adjustable (can be turned off) Bandpass – Subsonic 15 Hz (can be turned off) Phase – Slope high- / lowpass 12 dB Slope subsonic / lowpass 12 dB Signal-to-noise ratio digital input – Signal-to-noise ratio analog input 108 dB (A-weighted) Distortion (THD) 0.002 % Damping factor 160 Operating voltage 10.5 – 18 Volts (max. 5 sec. down to 6 Volts) Idle current 1050 mA Fuse 2 x 30 A LP-Mini-fuse (APS) Power rating DC 12 V ⎓ 80 A max. Ambient operating temperature range -40 °C to +70 °C Additional features Active, adjustable crossover, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control Dimensions (H x W x D) 46 x 130 x 153 mm / 1.81 x 5.12 x 6.02" Scope of delivery: 1 x Amplifier MATCH UP 1FX 1 x Mounting plates and material 1 x Instruction manual